Published · 4 min read
A PE film roll is not merely a stock item after it leaves production; it establishes the starting condition for printing, slitting and bag conversion. For Poşetsan Date, good storage means keeping the roll clean, stable and traceable. Poşetsan and Date Plastik assess shipment and storage decisions alongside the film type and real converting plan.
Depolama koşulunun etkisi
Continuous pressure on the core and winding can compact layers. Heat, dust or unsuitable stacking can also affect unwind behaviour and surface quality. The issue may appear at the machine, while its cause began at an earlier transport or warehouse step.
İzlenebilirlik ve kabul
The identification label must remain with the roll: lot, film construction, dimensions, net weight, production date and direction belong in the same record. If identification is lost, the right film can be assigned to the wrong job; warehouse data and the roll marking should therefore be checked together.
Alan ve taşıma düzeni
Keep rolls in a clean, dry area out of direct sunlight. The objective is not one universal temperature, but reduced sudden environmental changes and an area consistent with supplier requirements. Recorded temperature and humidity make later investigation more reliable.
FIFO ve üretime hazırlık
A heavy roll left on its side can develop compression risk, particularly when it rests on one point for a long time. Stands, pallets and racks must suit weight and core diameter. Edge protection reduces impact risk, while forks should load the handling attachment rather than the film edge.
Kontrol listesi
FIFO is more than date order. Lot and acceptance status must be visible so material is used before unnecessary ageing. A questionable roll is identified separately, not silently mixed into production. That preserves traceability for quality review.
Uygulama notu
Before conversion, inspect wrap integrity, edges, telescoping, core and surface. If a roll arrived from a colder or warmer area, allow it to acclimatise before opening. This pause helps assess condensation and winding-balance risk.
Sonuç
Poşetsan Date can share practical guidance on roll dimensions, running direction and process sequence. For Poşetsan and Date Plastik, the aim is to record a small warehouse deviation before it becomes machine scrap and resolve its actual cause.
Inspect wrapping, label and roll edges together at goods receipt.
Lift with the intended handling equipment, never by crushing the edge.
Match lot data to the work order.
Segregate questionable rolls and open a photo-backed record.
Repeat winding and surface checks before conversion.
Poşetsan Date · Date Plastik blog
Continuous pressure on the core and winding can compact layers. Heat, dust or unsuitable stacking can also affect unwind behaviour and surface quality. The issue may appear at the machine, while its cause began at an earlier transport or warehouse step.
The identification label must remain with the roll: lot, film construction, dimensions, net weight, production date and direction belong in the same record. If identification is lost, the right film can be assigned to the wrong job; warehouse data and the roll marking should therefore be checked together.
Keep rolls in a clean, dry area out of direct sunlight. The objective is not one universal temperature, but reduced sudden environmental changes and an area consistent with supplier requirements. Recorded temperature and humidity make later investigation more reliable.
A heavy roll left on its side can develop compression risk, particularly when it rests on one point for a long time. Stands, pallets and racks must suit weight and core diameter. Edge protection reduces impact risk, while forks should load the handling attachment rather than the film edge.
FIFO is more than date order. Lot and acceptance status must be visible so material is used before unnecessary ageing. A questionable roll is identified separately, not silently mixed into production. That preserves traceability for quality review.
Before conversion, inspect wrap integrity, edges, telescoping, core and surface. If a roll arrived from a colder or warmer area, allow it to acclimatise before opening. This pause helps assess condensation and winding-balance risk.
Poşetsan Date can share practical guidance on roll dimensions, running direction and process sequence. For Poşetsan and Date Plastik, the aim is to record a small warehouse deviation before it becomes machine scrap and resolve its actual cause.
A PE film roll is not merely a stock item after it leaves production; it establishes the starting condition for printing, slitting and bag conversion. For Poşetsan Date, good storage means keeping the roll clean, stable and traceable. Poşetsan and Date Plastik assess shipment and storage decisions alongside the film type and real converting plan.